Heatrex custom manufactures TUBULAR & FINNED TUBULAR
HEATING ELEMENTS, IMMERSION
HEATERS, DUCT HEATERS,
UNIT HEATERS & CIRCULATION
HEATERS
Products Tubular & Finned Tubular
Heating Elements
Electric Immersion
Heaters
Enclosure Heaters/
Switchgear Heaters
Process Duct Heaters Circulation Heaters Refrigeration Defrost
Heaters
Bolt Heaters/Flexible
Heaters
HVAC Electric Duct
Heaters
Unit and Comfort Heaters Explosion-Proof Heaters Impedance Heating
Systems
Blog
Heatrex
P.O. Box 515,
Meadville, PA 16335
Phone: (814) 724-1800
Fax: (814) 333-6580
E-mail: sales@heatrex.com
www.heatrex.com Privacy  |  Sitemap
All Categories > Unit and Comfort Heaters > Fan-Forced Heaters > 926 Series Unit Heater > Item # HX-926U25000CA  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # HX-926U25000CA, 926 Series Unit Heater



The 926 Series unit heater is designed for industrial and commercial applications.
  • Large Capacity : Heavy-duty construction with ratings up to 60 kW at 2000 CFM.
  • Control Options : Wide range of factory built-in or field installed control options to meet job specifications.
  • Single Point Electrical Hook-up : Heater, fan motor and controls are all connected to the same branch circuit. Field connections and built-in controls are easily accessed in the side-mounted control compartment.
  • Discharge Direction : The 926 Series heater may be mounted horizontally using one of two brackets (supplied) or vertically using four threaded rods (not included).

These units are not for residential use in the United States.





Specifications  · Standard Construction Features  · Applications

Specifications

Power

25 kW

Voltage Rating

208 V

Phase

1

Total Amps1

121.3 A

Airflow

1300 CFM

Approx. Air Temperature Rise

61 ºF
34
ºC

Motor Rating

1/8 hp, 1550 rpm, 240/208 V

Dimension A

17-1/2 inches
444
mm

Dimension B

21-7/8 inches
556
mm

Dimension C

22-1/2 inches
572
mm

Dimension D

18-1/2 inches
470
mm

Dimension E

16 inches
407
mm

Dimension F

24-13/16 inches
630
mm

Dimension G

12 inches
305
mm

Dimension H

5-13/16 inches
148
mm

Dimension I

23-5/16 inches
592
mm

Weight

85 lb
39
kg

Factory Built-in Options

View
C - Three Pole Contactor
D - Disconnect Switch 40 Amp

D2 - Disconnect Switch 80 Amp

D5 - Disconnect Switch (100 Amps maximum)

G - Fusing

R1 - 24 V Relay

R2 - 24 V Relay with Transformer

T - Thermostat

U - Fan "ON" Switch

X - 120 V Control

Field-Installed Options

926-124513 - Diffuser cone (2-10 kW)
926-124514 - Diffuser cone (15-30 kW)

926-124515 - Thermostat Kit

926-124516 - 24 V Relay Kit

926-124517 - 24 V Relay Kit with 208V Transformer

926-124517 - 24 V Relay Kit with Transformer, 208 V

926-124518 - 24 V Relay Kit with Transformer, 240 V

926-124519 - 24 V Relay Kit with Transformer, 277 V

926-124520 - 24 V Relay Kit with Transformer, 480 V

926-124520 - 24V Relay Kit with 480V Transformer

926-161077 - Diffuser cone (40-60 kW)
1 Total Amps = Heating element amps and motor amps.


Standard Construction Features
  • Heating Elements - Industrial grade stainless steel tubular elements in 2-10 kW units and steel finned tubular elements in 15-60 kW units.
  • Housing - Cabinet is constructed of 18 and 20-gauge steel finished with durable almond epoxy-polyester powder paint.
  • Outlet Grille - The outlet grille has individually adjustable louvers to direct airflow. A protective outlet mesh screen, provided on 2-30 kW heaters, allows for lower mounting heights.
  • Fan Motor - Totally enclosed, thermally protected motor with factory-lubricated ball bearings (except for 15 to 25 kW at 208/240V) operates at 58 dBA (2-10 kW), 67 dBA (15-30 kW) or 77 dBA (40-60 kW). Blow-through design reduces motor operating temperature for longer life.
  • Built-in Controls - Include 240/208 volt control circuit (with transformer if necessary), automatic reset thermal cutout, fan override and factory-installed contactor. Power fusing is supplied for heaters over 48 amps.
  • Mounting Bracket - Wall and ceiling bracket provided with each unit under 40 kW for horizontal mounting. 40-60 kW heaters furnished with four corner support brackets for ceiling mounting.
  • Installation Requirements - For best performance, do not install unit heaters above recommended maximum mounting heights of 2-10 kW, 8-feet; 15-30 kW, 10-feet; 40-60 kW, 15-feet. All but 40-60 kW heaters can be installed at lower mounting heights. Minimum height for 40-60 kW heaters is 8-feet. Maximum ambient room temperature for proper operation is 85°F.




Applications
  • Garages
  • Mechanical Rooms
  • Stairwells
  • Vestibules
  • Warehouses
  • Workshops




 MORE IMAGES 

·  926 Series Std. Wall & Ceiling Installation


 DOWNLOADS 

926 Series Submittal
(DOC, 592KB)

Unit Heaters Limited Warranty
(PDF, 90KB)

926 Series Unit Heaters
(PDF, 116KB)

IOM
(PDF, 218KB)


Heatrex