Heatrex custom manufactures TUBULAR & FINNED TUBULAR
HEATING ELEMENTS, IMMERSION
HEATERS, DUCT HEATERS,
UNIT HEATERS & CIRCULATION
HEATERS
Products Tubular & Finned Tubular
Heating Elements
Electric Immersion
Heaters
Enclosure Heaters/
Switchgear Heaters
Process Duct Heaters Circulation Heaters Refrigeration Defrost
Heaters
Bolt Heaters/Flexible
Heaters
HVAC Electric Duct
Heaters
Unit and Comfort Heaters Explosion-Proof Heaters Impedance Heating
Systems
Blog
Heatrex
P.O. Box 515,
Meadville, PA 16335
Phone: (814) 724-1800
Fax: (814) 333-6580
E-mail: sales@heatrex.com
www.heatrex.com Privacy  |  Sitemap
All Categories > Unit and Comfort Heaters > Fan-Forced Heaters > 234 Series Washdown/Corrosion Resistant Unit Heater > Item # HX-234-U11N-0100D  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # HX-234-U11N-0100D, 234 Series Washdown/Corrosion Resistant Unit Heater



The Heatrex 234 Series unit heater is the perfect solution to the problem of heating people or equipment in non-hazardous environments where moisture and corrosion exist. Advantages include :
  • Built-in Controls : All necessary safety and temperature controls are included in a single package. Components and motor are factory-wired to a single terminal block for field wiring, eliminating the chance for field error and reducing installation costs.
  • Single Point Electrical Hook-up : Heater, fan motor and controls are all connected to the same branch circuit.
  • Corrosion Resistant : Stainless steel construction, epoxy-coated aluminum fan blade and nonmetallic NEMA 4X terminal enclosure resist corrosion found in sewage treatment plants, swimming pools, car washes, paper mills and marine installations.
  • Washable : This watertight construction can be hosed down without disconnecting the heater, which makes it ideal for coal handling areas, steel mills, foundries, ships, wood finishing plants, cement, sand, grain and food processing facilities.





Specifications  · Standard Construction Features  · Applications

Specifications

Shipping Weight

70 Pound
32
Kilogram

Size

1

Power

10 kW

Voltage Rating

208 V

Phase

3

Total Amps1

30 A

Approx. Air Temperature Rise

22 ºF
12
ºC

Motor Rating

1/4 hp, 208 V, 1 ph

Dimension X

15 1/2 inches
39
cm

Dimension Y

21 1/2 inches
55
cm

Dimension Z

13 inches
33
cm

Mounting Hole Dimension BH

4 1/4 inches
11
cm

Mounting Hole Dimension BL

19 1/8 inches
49
cm

Mounting Hole Dimension M

8 1/2 inches
22
cm

Airflow

1450 CFM
2463
m3/h

Airflow Throw

43 ft
13
m

Outlet Velocity

1575 fpm
481
m/min

Net Weight

56 lbs
25
kg

Availability Code2

C

Factory Built-in Options

View
B - Delete swivel mounting bracket. Heater installs from the ceiling with field furnished threaded rods
C - Epoxy painted stainless steel parts and fan blade

D - Power disconnect switch

E - Monel finned tubular elements

F8 - Fan motor fusing with disconnecting contactor

L - "Heater on" pilot light

M - Secondary manual reset/over temperature cutout. Required for U.S. Coast Guard and ABS Approved designs

S - Three-position selector switch (heater-standby-fan)

T - Built-in thermostat 40° to 100°F (5° to 38°C) range

V - 120 volt control circuit, fused secondary and grounded

X - 2-Stage Control
1 Total Amps = Heating element amps and motor amps.
2 Availability Code : S = Stock, C = Custom
Stock heaters ordered with custom options subject to longer delivery.


Standard Construction Features
  • Heating Elements - Industrial grade, Type 316 stainless steel finned tubular elements with stainless steel fittings, manufactured by Heatrex.
  • Fan Motor Assembly - Totally enclosed, UL Recognized motor with permanently lubricated ball bearings for longer life. Designed to resist moisture and corrosion. Factory-wired to NEMA 4X enclosure. Fitted with an epoxy coated, aluminum fan blade suitable for corrosive salt spray environments.
  • Housing - Heating elements and motor are enclosed in a round, heavy 16-gauge stainless steel shroud.
  • Inlet/Outlet Grilles - Adjustable, stainless steel, louvered outlet grille can be rotated 90° to direct airflow up, down, left or right. Heavy gauge, stainless steel rear grille protects against accidental contact with the fan blade.
  • Control Enclosure - The non-metallic enclosure, which houses the element terminals and built-in controls, will not rust and meets NEMA 4X hose-down requirements.
  • Built-in Controls - Include automatic reset over temperature cutout, fan delay relay, controlling contactor (when required), transformer for 24-volt control circuit, terminal block for field wiring and a separate motor contactor for heaters above 12 kW.
  • Mounting Bracket -The heater comes complete with a stainless steel swivel mounting bracket which can be used either for wall or ceiling mounting. Four field supplied 3/8-16 threaded rods can also be used for ceiling installation.




Applications
  • Car Washes
  • Cement Plants
  • Coal Handling Areas
  • Dairies
  • Food Processing Plants
  • Marine and Offshore
  • Power Generating Stations
  • Steel Mills and Foundries
  • Swimming Pool Areas
  • Wastewater Treatment Plants




 MORE IMAGES 

·  234 Series Std. Wall & Ceiling Installation


 DOWNLOADS 

Unit Heaters Limited Warranty
(PDF, 90KB)

234 Series IOM
(PDF, 404KB)

234 Series Washdown/Corrosion-resistant Unit Heater
(PDF, 284KB)

234 Series Submittal
(DOC, 1334KB)


Heatrex