Heatrex
425 Hanley Industrail Court, St. Louis, MO 63144
Toll Free: (800) 394-6589 • Phone: (814) 724-1800 • Fax: (314) 644-5332
E-mail: sales@heatrex.com Website: www.heatrex.com
All Categories > Tubular & Finned Tubular Heating Elements > Tubular and Finned Tubular Elements > Item # HX-581X  


Item # HX-581X, Finned Tubular Elements


Heatrex tubular and finned tubular elements provide a highly efficient, reliable and cost effective means of supplying heat directly to air, various types of liquids and metals.

Construction
  • Nickel-chromium resistance wire is uniformly stretched and imbedded into magnesium-oxide powder.
  • Resistance wire is accurately centered within a copper, steel or alloy sheath.
  • Terminal pins are attached to the resistance coil at each end to create an unheated zone near the terminals.






Specifications  · Notes

Specifications

Size

0.475 inches

Type

Two Pass

Max. Sheath Temp.

1000° F (Monel 400)
1400° F (304 SS)

1400° F (316 SS)

750° F (Steel)

Sheath Material

304 SS (Stock)
316 SS (Stock)

Monel 400 (Stock)

Steel (Stock)

Min. Sheath Diameter

0.469 inches

Max. Sheath Diameter

0.481 inches

Nominal Wall Thickness

0.035 inches

Min. Sheath Lengths

11 inches

Max. Sheath Lengths

96 inches

Sheath Lengths Tolerances

1% of overall sheath length with a minimum of 1/8" and a maximum of 1"

Max. Cold Ends

16 inches

Max. Current Drawn

30 A

Max. Voltage

277 V

Power Tolerance

+5% W
-10%
W

Bending Information

Bending-Configurations

Terminal Information

Terminal-Configurations


Notes
  1. Stock – Material in stock. Custom – Material is either stocked in small quantity or must be ordered for each job.
  2. Other wall thicknesses available.





Print Back