Heatrex
425 Hanley Industrail Court, St. Louis, MO 63144
Toll Free: (800) 394-6589 • Phone: (814) 724-1800 • Fax: (314) 644-5332
E-mail: sales@heatrex.com • Website: www.heatrex.com
All Categories > Unit and Comfort Heaters > Radiant Heaters > AS Series Radiant Ceiling Panels > Item # HX-AS2424-375-120  


Item # HX-AS2424-375-120, AS Series Radiant Ceiling Panels

AS Series radiant panels are ideal for offsetting heat loss through exterior glass on the perimeter of a building. They help to control the problem of condensation typically found with these large exterior glass walls. Radiant panels provide improved comfort by maintaining an even temperature from floor to ceiling.
  • Radiant Heat : Radiant energy travels in straight lines and is absorbed by objects in the room, warming the space. Air quality is maintained because no forced air movement occurs with radiant heating.
  • Maximize Work Area : Ceiling mounted panels permit full use of floor and wall space.
  • Maintenance Free : Radiant panels have no moving parts, so they are maintenance free and can provide years of quiet, safe and clean operation.





Specifications  · Standard Construction Features  · Applications

Specifications

Power
375 W

Voltage Rating
120 V

Total Amps
3.1 A

Width
24 inches
610 mm

Height
24 inches
610 mm

Weight
15 lbs
6.8 kg

Finish Options
PT - Standard finish; textured white baked-on powder coating on front panel
S304 - 304 Stainless steel construction, includes 36" of sealtite conduit and silicone seal
S316 - 316 Stainless steel construction, includes 36" of sealtite conduit and silicone seal
SS - One time set-up fee if pattern is not in stock
SS - Silk screen to match acoustical ceiling tiles (specify style)

Factory Built-in Options
FC - Flexible electrical conduit.
S - Silicone seams, provides protection in high moisture areas. Includes 36" of sealtite conduit
TEG - Tegular reveal edge detail for 15/16" grid
TEGF - Fineline Tegular reveal edge for 9/16" grid

Field-Installed Options

 View
Filler Panel
Plaster Mounting Frames
Surface Mounting Frames


Standard Construction Features
  • Heating Element - High quality alloy resistance wire is electrically insulated with a UL Listed TEFZEL® compound rated for 200°C (392°F). Heating wires are covered with high-efficiency reflective foil.
  • Panel Design - Panel is made of 22-gauge galvanized steel with a white baked-on powder paint finish. Panel is crimped, not riveted, for improved strength.
  • Insulation - Each panel contains two inches of high temperature/high density mineral wool insulation.
  • Electrical - A junction box is attached to each panel for field wiring and to connect panels to each other.
  • Installation Requirements - Heater can be installed in suspended t-bar ceiling systems or can be surface or recessed mounted using optional mounting frames. heater comes equipped with four suspension clips. connecting wire or chain is supplied by customer. minimum recommended mounting height is eight feet from the floor.


Applications
  • Atriums
  • Enclosed Walkways
  • Entryways
  • Hospitals
  • Lobbies
  • Offices
  • Schools
  • Warehouses



Print Back