Heatrex
425 Hanley Industrail Court, St. Louis, MO 63144
Toll Free: (800) 394-6589 • Phone: (814) 724-1800 • Fax: (314) 644-5332
E-mail: sales@heatrex.com
• Website:
www.heatrex.com
|
|
|
|
|
Item # HX-936U03000K, 936 Series Heaters
|
|
|
|
|
|
The 936/937 Series ceiling heaters are designed for commercial applications. 936 Series heaters are designed for surface mounting and most can be adapted for T-Bar installation with an optional kit. The 937 Series heater is designed for recessed mounting and installation into 2-feet by 2-feet ceiling grids. The 937 Series comes with a built-in flange; an additional trim ring kit is not required.
- Enhanced Performance : These heaters set new industry standards with ratings up to 10000 W and 700 CFM in single and three-phase 208, 240 and 480 voltages.
- Increased Comfort : The side draw-through inlet with down discharge promotes circulation within the space for uniform temperatures and increased comfort.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Heating Elements - Stainless steel tubular elements with aluminum fins.
- Outlet Grille - The grille is made of 20-gauge galvanized steel and is finished with an epoxy-polyester powder paint in white or almond.
- Built-in Controls - Automatic reset thermal cutout and fan delay relay.
- Fan Motor - Quiet, direct drive aluminum fan and totally enclosed motor with lifetime lubricated ball bearings.
- Installation Requirements - For best performance, ceiling heaters should be installed between 8 and 12-feet above the floor.
|
|
|
|
- Classrooms
- Day Care
- Entryways
- Guard Houses
- Hallways
- Lobbies
- Offices
- Reception Areas
- Restrooms
- Vestibules
- Workshops
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
