Heatrex
425 Hanley Industrail Court, St. Louis, MO 63144
Toll Free: (800) 394-6589 • Phone: (814) 724-1800 • Fax: (314) 644-5332
E-mail: sales@heatrex.com • Website: www.heatrex.com
All Categories > Unit and Comfort Heaters > Forced-Air Heaters > 932 Series Commercial Wall Heater > Item # HX-932U01500T  


Item # HX-932U01500T, 932 Series Commercial Wall Heater

The 932 Series fan-forced wall heater is designed for commercial and industrial areas requiring higher KW ratings and quick recovery. The unit provides a burst of heat in areas affected by cold drafts or wide temperature swings.
  • Efficient Operation : The fan draws air into the top of the grille and discharges warm air downward to distribute heat and keep floors warm and dry. High CFM’s create air circulation within the room to provide uniform temperatures.
  • Extended Capacity : The 932 Series is available with one, two or three modules and ratings up to 12000 W at 480 CFM.





Specifications  · Standard Construction Features  · Applications

Specifications

Power
1500 W

Voltage Rating
480 V

Phase
1

Total Amps1
3.5 A

Airflow
160 CFM

Approx. Air Temperature Rise
30 ºF
17 ºC

Weight
28 lb
13 kg

Finish Options
A - Almond
W - White

Factory Built-in Options
D1 - Disconnect Switch, 600 V, Three-pole, 32 Amp
D2 - Disconnect Switch, 600 V, Three-pole, 64 Amp
D3 - Disconnect Switch, 277 V, Double-pole, 16 Amp
R1 - 24 Volt Relay
R2 - 24 Volt Relay with Transformer
S3 - Fan On/Auto Switch

Field-Installed Options
932-124500 - Surface Mounting Box (1500-4800 W)
932-146878 - 1" Semi Recessed Trim Kit (1500-4800 W)
932-153670 - 2" Semi Recessed Trim Kit (1500-4800 W)
932-158211 - Surface Mounting Box (6000-8000 W)
932-158212 - Surface Mounting Box (12000 W)
932-166532 - 1" Semi Recessed Trim Kit (6000-8000 W)
932-166533 - 2" Semi Recessed Trim Kit (6000-8000 W)
932-166534 - 1" Semi Recessed Trim Kit (12000 W)
932-166535 - 2" Semi Recessed Trim Kit (12000 W)
1 Total Amps = Heating element amps and motor amps.


Standard Construction Features
  • Heating Elements - Steel finned tubular elements.
  • Outlet Grille - The WCI has an 18-gauge steel grille with rounded corners and an epoxy-polyester powder paint finish in white or almond. The external thermostat adjustment knob can be replaced with the concealing plug provided for tamperproof construction.
  • Built-in Controls - Automatic reset thermal cutout, fan override and thermostat (32° to 120°F).
  • Fan Motor - Permanently lubricated, totally enclosed fan operates at a low 58 dBA.
  • Installation Requirements - Standard supply wiring rated at 60°C can be used for installation of wall heaters. Heater must be installed at least ten inches from the floor and adjacent walls.


Applications
  • Entryways
  • Garages
  • Guard Houses
  • Offices
  • Reception Areas
  • Restrooms
  • Stairwells
  • Vestibules



Print Back