Heatrex
425 Hanley Industrail Court, St. Louis, MO 63144
Toll Free: (800) 394-6589 • Phone: (814) 724-1800 • Fax: (314) 644-5332
E-mail: sales@heatrex.com Website: www.heatrex.com
All Categories > Unit and Comfort Heaters > Forced-Air Heaters > 930 Series Register Wall Heater > Item # HX-930U01250V  


Item # HX-930U01250V, 930 Series Register Wall Heater


The 930 Series register wall heater is ideal for use as a primary heat source in small areas or as supplemental heat in more spacious areas. Multiple heaters can be used to effectively heat large or odd-shaped rooms.
  • Installation Options : Units are designed for recessed mounting into shallow 2-inch by 3-inch stud walls or surface mounting with the use of an optional box.
  • Safety : Finned tubular elements provide electrical isolation from accidental contact.
  • Temperature Control : An optional thermostat can be field installed in the heater or a remote thermostat can be used.
    All models listed are single-phase.






Specifications  · Standard Construction Features  · Applications

Specifications

Power

938 W
1250
W

Voltage Rating

208 V
240
V

Total Amps1

4.7 A
5.40
A

Airflow

40 CFM

Approx. Air Temperature Rise

37 ºF
50
ºF
21
ºC
28
ºC

Weight

9 lb
4
kg

Finish Options

A - Almond
W - White

Factory Built-in Options

D3 - Disconnect Switch, 277 V, Double-pole, 20 Amp
T1 - Tamperproof Thermostat Single-pole, 25 Amp

T2 - Tamperproof Thermostat, Double-pole 25 Amp with off position

T5 - Adjustable Thermostat, Single-pole 25 Amp

T6 - Adjustable Thermostat, Double-pole 25 Amp with off position

Field-Installed Options

930-166766 - Surface Mounting Box
930-166767 - Adjustable Thermostat Kit, Single-pole 25 Amp

930-166768 - Tamperproof Thermostat Kit, Single-pole 25 Amp

930-166769 - Adjustable Thermostat Kit, Double-pole 25 Amp with off position

930-166770 - Tamperproof Thermostat Kit, Double-pole 25 Amp with off position
1 Total Amps = Heating element amps and motor amps.


Standard Construction Features
  • Heating Elements - Steel finned tubular elements.
  • Outlet Grille - The louvered front grille is made from 20-gauge steel. The grille is finished with epoxy-polyester powder paint in white or almond.
  • Built-in Controls - Automatic reset thermal cutout.
  • Fan Motor - Quiet, factory lubricated fan operates at 38 dBA at 40 CFM for models up to 1000 W and 41.3 dBA at 80 CFM for all models rated above 1000 W.
  • Installation Requirements - The air outlet should be installed a minimum of ten inches above vinyl floors.




Applications
  • Hallways
  • Restrooms
  • Stairwells





Print Back