Heatrex
425 Hanley Industrail Court, St. Louis, MO 63144
Toll Free: (800) 394-6589 • Phone: (814) 724-1800 • Fax: (314) 644-5332
E-mail: sales@heatrex.com
• Website:
www.heatrex.com
|
|
|
|
Item # HX-922U15000D, 922 Series Cabinet Unit Heater
|
|
|
|
The 922 Series cabinet heater offers a unique combination of quality, efficiency, reliability and flexibility. The attractive cabinet design blends into any commercial decor.
- Mounting Options : The cabinet heater can be mounted on the floor, wall or ceiling. It can also be recessed into the wall or ceiling as required. Twelve air inlet and outlet combinations are available.
- Simplified Maintenance : The insulated front panel is hinged to allow for easy access.
- Quiet Operation : The blower wheel is mounted directly on the motor shaft to reduce the noise level.
- Fresh Air Inlet : Manual or optional power-operated inlet allows fresh air to enter through the rear of the heater and mix with re-circulated room air.
|
|
|
|
|
|
|
- Heating Elements - Industrial grade steel finned tubular elements.
- Housing - Cabinet is constructed of 18-gauge galvanized steel with an epoxy-polyester powder paint finish in white or almond.
- Outlet Grille - An extruded architectural style aluminum grille discourages tampering with the heating element. The grille can be field converted for front or top air discharge.
- Built-in Controls - Automatic reset thermal cutout and fan delay. Power fusing is supplied for heaters over 48 amps.
- Fan Motor - The squirrel cage fan is beltless and two-speed, operating at 48 dBA at low speed and 50 dBA at high speed. Fan motors have permanently lubricated sleeve bearings for trouble-free service.
- Installation Requirements - For best performance, do not install cabinet heaters above recommended maximum mounting height of ten feet.
|
|
|
|
- Classrooms
- Hallways
- Meeting Rooms
- Lobbies
- Stairways
- Corridors
- Waiting Rooms
- Entry Ways
|
|
|
|
|
|
|
|
|
|
|
|
|
|