Heatrex
425 Hanley Industrail Court, St. Louis, MO 63144
Toll Free: (800) 394-6589 • Phone: (814) 724-1800 • Fax: (314) 644-5332
E-mail: sales@heatrex.com • Website: www.heatrex.com
All Categories > Circulation Heaters > Circulation Heaters > Water Circulation Heaters > Item # HX-3553N012K01  


Item # HX-3553N012K01, Water Circulation Heaters

      The Series HX-355 (50 W/in
2
      ) Heatrex circulation heaters are designed for heating water. These high quality Water Heaters include the following standard features :
      • Copper sheathed .475" diameter heating elements
      • Insulated steel vessel with a galvanized jacket
      • NEMA Type 1 terminal enclosure
      • Built-on thermostat, 60-250°F range
      • Choice of mounting brackets or mounting pads
      • Flange heaters have class 150 steel flanges which meet ANSI B16.5 standards
      • Rated 160 psi at 250°F
      If any special features are added to a standard heater, the part number will change to a 350-Series number. This part number is assigned after an order is placed.

    16" 150 lbs Flange construction, copper elements, 50 W/in?





Specifications  · Standard Construction  · Applications

Specifications

Power
12 kW

No. of Elements
3

Voltage Rating
240 V

Phase
3

Circuits
01

Dimension A
46 1/4 inches

Dimension B
34 1/2 inches

Dimension MC
26 1/2 inches

Dimension FC
4 1/8 inches

Dimension M
42 1/4 inches

Weight
81 lbs

Immersion Heater Connection

Flange Type

Immersion Heater Connection Size
3 inches

Accessories

 View
Drain Valve
Flow Switch
Low Liquid Cutoff
Pressure Guage
Pressure Relief Nozzle
Pressure Relief Valve
Pump Interlock Relay
Thermometer


Standard Construction
    The standard circulation heater construction includes an Heatrex Pipe Thread or Pipe Flange Immersion Heater mounted in a thermally insulated pressure vessel with inlet and outlet nozzles.

    A factory installed and pre-wired thermostat provides automatic process temperature control. Six heater mounting options are available to meet your specific installation requirements.


Applications
  • Adhesives
    		•
  • Oil Refining
    		•
  • Air Heating (Process)
    		•
  • Oils
    		•
  • Ammonia
    		•
  • Paint Lines
    		•
  • Anodizing Equipment
    		•
  • Pasteurizing
    		•
  • Automotive and Engines
    		•
  • Pipeline Heating
    		•
  • Chemical Processing
    		•
  • Plastic Machinery and
    		•
  • Curing
    		•
  • Processes
    		•
  • Cryogenic Processing
    		•
  • Platens
    		•
  • Degreasing Tanks
    		•
  • Plating Tanks
    		•
  • Desalinization Equipment
    		•
  • Preheating
    		•
  • Dessicant Drying
    		•
  • Presses
    		•
  • Drying
    		•
  • Process Air and Liquids
    		•
  • Food Processing
    		•
  • Purification Systems
    		•
  • Freeze Protection
    		•
  • Rinsing/Cleaning
    		•
  • Fuel Oils
    		•
  • Rolls and Cylinders
    		•
  • Gasoline Refining
    		•
  • Steam Heating
    		•
  • Heat Transfer Systems
    		•
  • Superheating
    		•
  • High Pressure Air or Gases
    		•
  • Tank Heating (Process, Storage)
    		•
  • Hydraulic Oils
    		•
  • Textiles
    		•
  • Laboratory Work
    		•
  • Wash Tanks
    		•
  • Lubrication Oils
    		•
  • Waste Water/Sewage
    		•
  • Metal Cleaning Baths
    		•
  • Treatment
    		•
  • Nitrogen
    		•
  • Water (Deionized, Potable, Process)
    		•
  • Oil Purifiers
    		•





    Print Back