Heatrex
425 Hanley Industrail Court, St. Louis, MO 63144
Toll Free: (800) 394-6589 • Phone: (814) 724-1800 • Fax: (314) 644-5332
E-mail: sales@heatrex.com • Website: www.heatrex.com
All Categories > Circulation Heaters > Circulation Heaters > Stainless Steel Circulation Heaters > Item # HX-3578N300U08  


Item # HX-3578N300U08, Stainless Steel Circulation Heaters

      The Series HX-350 (12 W/in
2
      ), HX-357 (20 W/in
2
      ) and HX-358 (50 W/in
2
      ) Heatrex circulation heaters are designed for heating mildly corrosive liquids or pure water solutions. This design may also be used for heating gases or liquids to high temperatures with optional thermostat and high temperature construction described in the Special Features section. These high quality Stainless Steel Heaters include the following standard features :
      • Incoloy sheathed .475" diameter heating elements
      • Insulated 304 stainless steel vessel with a galvanized jacket
      • NEMA Type 1 terminal enclosure
      • Built-on thermostat, 60-250°F range
      • Choice of mounting brackets or mounting pads
      • Flange heaters have class 150 stainless steel flanges which meet ANSI B16.5 standards
      • Rated 160 psi at 250°F
      • Optional 316 stainless steel construction
      • Optional passivation
      If any special features are added to a standard heater, the part number will change to a HX-350-Series number. This part number is assigned after an order is placed.

    16" 150 lbs Flange construction, incoloy elements, 20 W/in?





Specifications  · Standard Construction  · Applications

Specifications

Power
300 kW

No. of Elements
72

Rating
20 W/in2

Voltage Rating
480 V

Phase
3

Circuits
08

Dimension A
93 1/2 inches

Dimension B
68 inches

Dimension M
87 7/8 inches

Weight
1173 lbs

Immersion Heater Connection

Flange Type

Immersion Heater Connection Size
16 inches

Accessories

 View
Drain Valve
Flow Switch
Low Liquid Cutoff
Pressure Guage
Pressure Relief Nozzle
Pressure Relief Valve
Pump Interlock Relay
Thermometer


Standard Construction
    The standard circulation heater construction includes an Heatrex Pipe Thread or Pipe Flange Immersion Heater mounted in a thermally insulated pressure vessel with inlet and outlet nozzles.

    A factory installed and pre-wired thermostat provides automatic process temperature control. Six heater mounting options are available to meet your specific installation requirements.


Applications
  • Adhesives
    		•
  • Oil Refining
    		•
  • Air Heating (Process)
    		•
  • Oils
    		•
  • Ammonia
    		•
  • Paint Lines
    		•
  • Anodizing Equipment
    		•
  • Pasteurizing
    		•
  • Automotive and Engines
    		•
  • Pipeline Heating
    		•
  • Chemical Processing
    		•
  • Plastic Machinery and
    		•
  • Curing
    		•
  • Processes
    		•
  • Cryogenic Processing
    		•
  • Platens
    		•
  • Degreasing Tanks
    		•
  • Plating Tanks
    		•
  • Desalinization Equipment
    		•
  • Preheating
    		•
  • Dessicant Drying
    		•
  • Presses
    		•
  • Drying
    		•
  • Process Air and Liquids
    		•
  • Food Processing
    		•
  • Purification Systems
    		•
  • Freeze Protection
    		•
  • Rinsing/Cleaning
    		•
  • Fuel Oils
    		•
  • Rolls and Cylinders
    		•
  • Gasoline Refining
    		•
  • Steam Heating
    		•
  • Heat Transfer Systems
    		•
  • Superheating
    		•
  • High Pressure Air or Gases
    		•
  • Tank Heating (Process, Storage)
    		•
  • Hydraulic Oils
    		•
  • Textiles
    		•
  • Laboratory Work
    		•
  • Wash Tanks
    		•
  • Lubrication Oils
    		•
  • Waste Water/Sewage
    		•
  • Metal Cleaning Baths
    		•
  • Treatment
    		•
  • Nitrogen
    		•
  • Water (Deionized, Potable, Process)
    		•
  • Oil Purifiers
    		•





    Print Back