Heatrex
425 Hanley Industrail Court, St. Louis, MO 63144
Toll Free: (800) 394-6589 • Phone: (814) 724-1800 • Fax: (314) 644-5332
E-mail: sales@heatrex.com Website: www.heatrex.com
All Categories > Unit and Comfort Heaters > Baseboard/Convector Heaters > 912/911 Series Architectural Cabinet Convectors > Item # HX-911U02000K  


Item # HX-911U02000K, Architectural Sloped Top Cabinet Convector


The 912/911 Series cabinet convectors are designed to heat large commercial spaces. They provide large amounts of heat without the fan noise associated with unit heaters.
  • Installation Options : Units may be mounted to the wall, flush on the floor or on pedestals. 912 Series units can be fully recessed when the front warm air outlet option is used. These units are not for residential use in the United States.
  • Added Safety : The sloped-top cabinet on the 911 Series prevents objects from being set on top of the heater, which can restrict airflow and cause overheating.
  • Wall-to-Wall Installation : A finished back mounting plate is available so that the unit can be mounted against glass walls to prevent cold downdrafts.
For three-phase units a double pole relay or thermostat is required.






Specifications  · Standard Construction Features  · Applications

Specifications

Power

2000 W

Voltage Rating

240 V

Phase

3

Total Amps

4.80 A

Heater Length

27.20 inches
690
mm

Weight

37 lbs
17
kg

Finish Options

A - Almond
W - White

Factory Built-in Options

D1 - Disconnect Switch, Three-pole, 600 V, 40 Amp
R1 - 24V Relay, 240 V, 22 Amp; 277 V, 19 Amp

R2 - 24 V Relay with Transformer, 240 V, 22 Amp; 277 V, 19 Amp

R3 - 24 V Double-pole Relay, 240 V, 22 Amp; 277 V, 19 Amp

R4 - 240 V Relay, Single-pole, 240 V, 22 Amp

R5 - 240 V Double-pole Relay, 240 V, 22 Amp

R6 - Pneumatic Relay, 480 V, 25 Amp

S - Smooth Finish on Heater Back

T1 - Tamperproof Thermostat, Single-pole, 240 V, 30 Amp

T2 - Tamperproof Thermostat, Double-pole, 480 V, 15 Amp

X1 - 240V Transformer - 50 VA

X2 - 24 V Transformer - 50 VA

Field-Installed Options

View
911-124546 - Corner (interior and exterior)
911-124547 - Round Pedestal Kit

911-124548 - Round Pedestal Kit

911-124549 - Round Pedestal Kit

911-124550 - Round Pedestal Kit

911-124551 - Round Pedestal Kit

911-124552 - Round Pedestal Kit

911-124553 - Recessed Trim Kit

911-124555 - Recessed Trim Kit

911-124556 - Recessed Trim Kit

911-124557 - Recessed Trim Kit

911-124561 - Control Box

911-124562 - 24 V Relay Kit, Single-pole, 240 V, 22 Amp; 277 V, 19 Amp

911-124563 - 24 V Relay Kit, Double-pole, 240 V, 22 Amp; 277 V, 19 Amp

911-124564 - 240 V Relay Kit, Single-pole, 240 V, 22 Amp

911-124565 - 240 V Relay Kit, Double-pole, 240 V, 22 Amp

911-124566 - 24 V Relay Kit with Transformer, 208 V, 22 Amp

911-124567 - 24 V Relay Kit with Transformer, 240 V, 22 Amp

911-124568 - 24 V Relay Kit with Transformer, 277 V, 19 Amp

911-124569 - Transformer Kit -208/24 V - 50 VA

911-124570 - Transformer Kit-240/24 V - 50 VA

911-124571 - Transformer Kit-277/24 V - 50 VA

912-124554 - Recessed Trim Kit


Standard Construction Features
  • Heating Elements - Carbon steel elements with aluminum fins float on high temperature nylon bushings for quiet operation. Stainless steel elements with aluminum fins on elements rated 1500 watts and above. Average watt density is 1000 W/ft (3280 W/m). Low watt density elements of 750 W/ft (2460 W/m) are also available.
  • Housing - Cabinet is constructed of 20-gauge steel with a 16-gauge steel front cover. The unit has an epoxy-polyester powder paint finish in white or almond. Mounting holes are provided along the back of the cabinet for wall installation.
  • Inlet/Outlet Grilles - The fresh air inlet grille is located on the front of the unit. An extruded aluminum outlet grille discourages tampering with the heating elements.
  • Built-in Controls - Linear limit, automatic reset thermal cutout.




Applications
  • Classrooms
  • Conference Rooms
  • Hallways
  • Lobbies





Print Back