Heatrex custom manufactures TUBULAR & FINNED TUBULAR
HEATING ELEMENTS, IMMERSION
HEATERS, DUCT HEATERS,
UNIT HEATERS & CIRCULATION
HEATERS
Products Tubular & Finned Tubular
Heating Elements
Electric Immersion
Heaters
Enclosure Heaters/
Switchgear Heaters
Process Duct Heaters Circulation Heaters Refrigeration Defrost
Heaters
Bolt Heaters/Flexible
Heaters
HVAC Electric Duct
Heaters
Unit and Comfort Heaters Explosion-Proof Heaters Impedance Heating
Systems
Blog
Heatrex
P.O. Box 515,
Meadville, PA 16335
Phone: (814) 724-1800
Fax: (814) 333-6580
E-mail: sales@heatrex.com
www.heatrex.com Privacy  |  Sitemap
All Categories > Unit and Comfort Heaters > Forced-Air Heaters > 936/937 Series Fan-Forced Ceiling Heater > Item # HX-936U02000K  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # HX-936U02000K, 936 Series Heaters



The 936/937 Series ceiling heaters are designed for commercial applications. 936 Series heaters are designed for surface mounting and most can be adapted for T-Bar installation with an optional kit. The 937 Series heater is designed for recessed mounting and installation into 2-feet by 2-feet ceiling grids. The 937 Series comes with a built-in flange; an additional trim ring kit is not required.
  • Enhanced Performance : These heaters set new industry standards with ratings up to 10000 W and 700 CFM in single and three-phase 208, 240 and 480 voltages.
  • Increased Comfort : The side draw-through inlet with down discharge promotes circulation within the space for uniform temperatures and increased comfort.





Specifications  · Standard Construction Features  · Applications

Specifications

Power

2000 W

Phase

3

Voltage Rating

240 V

Total Amps1

5.5 A

Airflow

450 CFM

Approx. Air Temperature Rise

14 ºF
8
ºC

Weight

25 lb
11.3
kg

Finish Options

A - Almond
W - White

Factory Built-in Options

D1 - Disconnect Switch, 600 V, Three-pole, 40 Amp
D2 - Disconnect Switch 600 V, Three-pole, 80 Amp

D3 - Disconnect Switch, 277 V, Double-pole, 20 Amp

R1 - 24 V Control Relay

R2 - 24 V Control Relay with Transformer

S3 - Summer Fan Switch and Pilot Light

T1 - Built-in Tamperproof Thermostat

X - 120 V Control

Field-Installed Options

936-158478 - Tamperproof thermostat kit
936-158479 - Adaptor for T-Bar for CDI Surface Mounting 2000 through 5000 Watt Heaters only
1 Total Amps = Heating element amps and motor amps.


Standard Construction Features
  • Heating Elements - Stainless steel tubular elements with aluminum fins.
  • Outlet Grille - The grille is made of 20-gauge galvanized steel and is finished with an epoxy-polyester powder paint in white or almond.
  • Built-in Controls - Automatic reset thermal cutout and fan delay relay.
  • Fan Motor - Quiet, direct drive aluminum fan and totally enclosed motor with lifetime lubricated ball bearings.
  • Installation Requirements - For best performance, ceiling heaters should be installed between 8 and 12-feet above the floor.




Applications
  • Classrooms
  • Day Care
  • Entryways
  • Guard Houses
  • Hallways
  • Lobbies
  • Offices
  • Reception Areas
  • Restrooms
  • Vestibules
  • Workshops




 MORE IMAGES 

·  Uniform Circulation

·  Dimensional Drawing


 DOWNLOADS 

Unit Heaters Limited Warranty
(PDF, 90KB)

Unit Heaters Color Selection Chart
(PDF, 86KB)

937 Series Submittal
(DOC, 690KB)

937 Series IOM
(PDF, 219KB)

936/937 Commercial Ceiling Heater
(PDF, 1206KB)

936 Series Ceiling Heater Submittal
(DOC, 2418KB)

936 Series Ceiling Heater IOM
(PDF, 391KB)

936 Series Surface Mount 2000-5000 Heaters
(PDF, 155KB)


Heatrex