Heatrex custom manufactures TUBULAR & FINNED TUBULAR
HEATING ELEMENTS, IMMERSION
HEATERS, DUCT HEATERS,
UNIT HEATERS & CIRCULATION
HEATERS
Products Tubular & Finned Tubular
Heating Elements
Electric Immersion
Heaters
Enclosure Heaters/
Switchgear Heaters
Process Duct Heaters Circulation Heaters Refrigeration Defrost
Heaters
Bolt Heaters/Flexible
Heaters
HVAC Electric Duct
Heaters
Unit and Comfort Heaters Explosion-Proof Heaters Impedance Heating
Systems
Blog
Heatrex
P.O. Box 515,
Meadville, PA 16335
Phone: (814) 724-1800
Fax: (814) 333-6580
E-mail: sales@heatrex.com
www.heatrex.com Privacy  |  Sitemap
All Categories > Unit and Comfort Heaters > Forced-Air Heaters > 933 Series Architectural Wall Heater > Item # HX-933U04800N  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # HX-933U04800N, 933 Series Architectural Wall Heater



The 933 Series fan-forced wall heater is designed for commercial and industrial areas requiring higher KW ratings and quick recovery. The unit provides a burst of heat in areas affected by cold drafts or wide temperature swings.
  • Efficient Operation : The fan draws air into the top of the grille and discharges warm air downward to distribute heat and keep floors warm and dry. High CFMs create air circulation within the room to provide uniform temperatures.
  • Extended Capacity : The 933 Series is available with one, two or three modules and ratings up to 12,000 W and 480 CFM.





Specifications  · Standard Construction Features  · Applications

Specifications

Power

4800 W

Voltage Rating

277 V

Phase

1

Total Amps1

17.7 A

Airflow

160 CFM

Approx. Air Temperature Rise

96 ºF
53
ºC

Weight

28 lb
13
kg

Color Code Options

A - Almond
AE - Metallic Silver

BZ - Bronze

CM - Charcoal Steel

W - White

Factory Built-in Options

D1 - Disconnect Switch, 600 V, Three-pole, 32 Amp
D2 - Disconnect Switch 600V, Three-pole, 64 Amp

D3 - Disconnect Switch, 277 V, Double-pole, 16 Amp

R1 - 24 V Relay

R2 - 24 V Relay with Transformer

S3 - Fan On/Auto Switch

Field-Installed Options

933-124501 - Surface Mounting Box (1500-4800 W)
933-151114 - 1" Semi Recessed Trim Kit (1500-4800 W)

933-151115 - 2" Semi Recessed Trim Kit (1500-4800 W)

933-158471 - Surface Mounting Box (6000-8000 W)

933-166530 - 1" Semi Recessed Trim Kit (6000-8000 W)

933-166531 - 2" Semi Recessed Trim Kit (6000-8000 W)

933-269345 - Surface Mounting Box (12000W)

933-269346 - 1" Semi Recessed Trim Kit (12000W)

933-269347 - 2" Semi Recessed Trim Kit (12000W)
1 Total Amps = Heating element amps and motor amps.


Standard Construction Features
  • Heating Elements - Steel finned tubular elements.
  • Outlet Grille - The 933 Series has an architectural extruded aluminum grille in a choice of seven epoxy-polyester powder paint finishes. The closely spaced, heavy bar grille design prevents insertion of foreign objects. The tamperproof thermostat adjustment is concealed behind the front cover.
  • Built-in Controls - Automatic reset thermal cutout, fan override and thermostat.
  • Fan Motor - Permanently lubricated, totally enclosed fan operates at a low 61 dBA.
  • Installation Requirements - Standard supply wiring rated at 60°C can be used for installation of wall heaters. Heater must be installed at least ten inches from the floor and adjacent walls.




Applications
  • Entryways
  • Garages
  • Guard Houses
  • Offices
  • Reception Areas
  • Restrooms
  • Stairwells
  • Vestibules




 MORE IMAGES 

·  Dimensional Drawing

·  Double Unit

·  Grille Dimesions

·  Side View


 DOWNLOADS 

Unit Heaters Limited Warranty
(PDF, 90KB)

Unit Heaters Color Selection Chart
(PDF, 86KB)

Architectural Wall Htr 933 Series IOM
(PDF, 220KB)

Submittal
(DOC, 4069KB)

933 Series Architectural Wall Heater
(PDF, 235KB)

IOM - Thermostat Kit
(PDF, 120KB)


Heatrex