Heatrex custom manufactures TUBULAR & FINNED TUBULAR
HEATING ELEMENTS, IMMERSION
HEATERS, DUCT HEATERS,
UNIT HEATERS & CIRCULATION
HEATERS
Products Tubular & Finned Tubular
Heating Elements
Electric Immersion
Heaters
Enclosure Heaters/
Switchgear Heaters
Process Duct Heaters Circulation Heaters Refrigeration Defrost
Heaters
Bolt Heaters/Flexible
Heaters
HVAC Electric Duct
Heaters
Unit and Comfort Heaters Explosion-Proof Heaters Impedance Heating
Systems
Blog
Heatrex
P.O. Box 515,
Meadville, PA 16335
Phone: (814) 724-1800
Fax: (814) 333-6580
E-mail: sales@heatrex.com
www.heatrex.com Privacy  |  Sitemap
All Categories > Unit and Comfort Heaters > Forced-Air Heaters > 932 Series Commercial Wall Heater > Item # HX-932U06000V  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # HX-932U06000V, 932 Series Commercial Wall Heater



The 932 Series fan-forced wall heater is designed for commercial and industrial areas requiring higher KW ratings and quick recovery. The unit provides a burst of heat in areas affected by cold drafts or wide temperature swings.
  • Efficient Operation : The fan draws air into the top of the grille and discharges warm air downward to distribute heat and keep floors warm and dry. High CFM’s create air circulation within the room to provide uniform temperatures.
  • Extended Capacity : The 932 Series is available with one, two or three modules and ratings up to 12000 W at 480 CFM.





Specifications  · Standard Construction Features  · Applications

Specifications

Power

4500 W
6000
W

Voltage Rating

208 V
240
V

Phase

1

Total Amps1

22.0 A
25.4
A

Airflow

320 CFM

Approx. Air Temperature Rise

45 ºF
60
ºF
25
ºC
33
ºC

Weight

50 lb
23
kg

Finish Options

A - Almond
W - White

Factory Built-in Options

D1 - Disconnect Switch, 600 V, Three-pole, 32 Amp
D2 - Disconnect Switch, 600 V, Three-pole, 64 Amp

D3 - Disconnect Switch, 277 V, Double-pole, 16 Amp

R1 - 24 Volt Relay

R2 - 24 Volt Relay with Transformer

S3 - Fan On/Auto Switch

Field-Installed Options

932-124500 - Surface Mounting Box (1500-4800 W)
932-146878 - 1" Semi Recessed Trim Kit (1500-4800 W)

932-153670 - 2" Semi Recessed Trim Kit (1500-4800 W)

932-158211 - Surface Mounting Box (6000-8000 W)

932-158212 - Surface Mounting Box (12000 W)

932-166532 - 1" Semi Recessed Trim Kit (6000-8000 W)

932-166533 - 2" Semi Recessed Trim Kit (6000-8000 W)

932-166534 - 1" Semi Recessed Trim Kit (12000 W)

932-166535 - 2" Semi Recessed Trim Kit (12000 W)
1 Total Amps = Heating element amps and motor amps.


Standard Construction Features
  • Heating Elements - Steel finned tubular elements.
  • Outlet Grille - The WCI has an 18-gauge steel grille with rounded corners and an epoxy-polyester powder paint finish in white or almond. The external thermostat adjustment knob can be replaced with the concealing plug provided for tamperproof construction.
  • Built-in Controls - Automatic reset thermal cutout, fan override and thermostat (32° to 120°F).
  • Fan Motor - Permanently lubricated, totally enclosed fan operates at a low 58 dBA.
  • Installation Requirements - Standard supply wiring rated at 60°C can be used for installation of wall heaters. Heater must be installed at least ten inches from the floor and adjacent walls.




Applications
  • Entryways
  • Garages
  • Guard Houses
  • Offices
  • Reception Areas
  • Restrooms
  • Stairwells
  • Vestibules




 MORE IMAGES 

·  Dimensional Drawing


 DOWNLOADS 

932 Series Commercial Wall Heater
(PDF, 186KB)

Unit Heaters Limited Warranty
(PDF, 90KB)

Unit Heaters Color Selection Chart
(PDF, 86KB)

Commercial Wall Htr IOM
(PDF, 220KB)

932 Submittal
(DOC, 905KB)

IOM - Thermostat Kit
(PDF, 120KB)


Heatrex