Item # HX-932U04000V, 932 Series Commercial Wall Heater On Heatrex, Inc.

Products Tubular & Finned Tubular
Heating Elements Electric Immersion
Heaters Enclosure Heaters/
Switchgear Heaters Process Duct Heaters Circulation Heaters Refrigeration Defrost
Heaters Bolt Heaters/Flexible
Heaters HVAC Electric Duct
Heaters Unit and Comfort Heaters Explosion-Proof Heaters Impedance Heating
Systems Blog

Heatrex
P.O. Box 515,
Meadville, PA 16335
Phone: (814) 724-1800
Fax: (814) 333-6580
E-mail: sales@heatrex.com
www.heatrex.com Privacy | Sitemap

All Categories > Unit and Comfort Heaters > Forced-Air Heaters > 932 Series Commercial Wall Heater > Item # HX-932U04000V


	Item # HX-932U04000V, 932 Series Commercial Wall Heater

larger image

The 932 Series fan-forced wall heater is designed for commercial and industrial areas requiring higher KW ratings and quick recovery. The unit provides a burst of heat in areas affected by cold drafts or wide temperature swings.

Efficient Operation : The fan draws air into the top of the grille and discharges warm air downward to distribute heat and keep floors warm and dry. High CFM’s create air circulation within the room to provide uniform temperatures.
Extended Capacity : The 932 Series is available with one, two or three modules and ratings up to 12000 W at 480 CFM.

Specifications · Standard Construction Features · Applications

Specifications

Power

3000 W
4000 W

Voltage Rating

208 V
240 V

Phase

Total Amps¹

14.8 A
17.0 A

Airflow

160 CFM

Approx. Air Temperature Rise

60 ºF
80 ºF
33 ºC
44 ºC

Weight

24 lb
11 kg

Finish Options

A - Almond
W - White

Factory Built-in Options

D1 - Disconnect Switch, 600 V, Three-pole, 32 Amp
D2 - Disconnect Switch, 600 V, Three-pole, 64 Amp
D3 - Disconnect Switch, 277 V, Double-pole, 16 Amp
R1 - 24 Volt Relay
R2 - 24 Volt Relay with Transformer
S3 - Fan On/Auto Switch

Field-Installed Options

932-124500 - Surface Mounting Box (1500-4800 W)
932-146878 - 1" Semi Recessed Trim Kit (1500-4800 W)
932-153670 - 2" Semi Recessed Trim Kit (1500-4800 W)
932-158211 - Surface Mounting Box (6000-8000 W)
932-158212 - Surface Mounting Box (12000 W)
932-166532 - 1" Semi Recessed Trim Kit (6000-8000 W)
932-166533 - 2" Semi Recessed Trim Kit (6000-8000 W)
932-166534 - 1" Semi Recessed Trim Kit (12000 W)
932-166535 - 2" Semi Recessed Trim Kit (12000 W)

¹ Total Amps = Heating element amps and motor amps.

Standard Construction Features

Heating Elements - Steel finned tubular elements.
Outlet Grille - The WCI has an 18-gauge steel grille with rounded corners and an epoxy-polyester powder paint finish in white or almond. The external thermostat adjustment knob can be replaced with the concealing plug provided for tamperproof construction.
Built-in Controls - Automatic reset thermal cutout, fan override and thermostat (32° to 120°F).
Fan Motor - Permanently lubricated, totally enclosed fan operates at a low 58 dBA.
Installation Requirements - Standard supply wiring rated at 60°C can be used for installation of wall heaters. Heater must be installed at least ten inches from the floor and adjacent walls.

Applications

Entryways
Garages
Guard Houses
Offices
Reception Areas
Restrooms
Stairwells
Vestibules

MORE IMAGES


	· Dimensional Drawing

DOWNLOADS


		932 Series Commercial Wall Heater (PDF, 186KB)

		Unit Heaters Limited Warranty (PDF, 90KB)

		Unit Heaters Color Selection Chart (PDF, 86KB)

		Commercial Wall Htr IOM (PDF, 220KB)

		932 Submittal (DOC, 905KB)

		IOM - Thermostat Kit (PDF, 120KB)

Item # HX-932U04000V, 932 Series Commercial Wall Heater