Heatrex custom manufactures TUBULAR & FINNED TUBULAR
HEATING ELEMENTS, IMMERSION
HEATERS, DUCT HEATERS,
UNIT HEATERS & CIRCULATION
HEATERS
Products Tubular & Finned Tubular
Heating Elements
Electric Immersion
Heaters
Enclosure Heaters/
Switchgear Heaters
Process Duct Heaters Circulation Heaters Refrigeration Defrost
Heaters
Bolt Heaters/Flexible
Heaters
HVAC Electric Duct
Heaters
Unit and Comfort Heaters Explosion-Proof Heaters Impedance Heating
Systems
Blog
Heatrex
P.O. Box 515,
Meadville, PA 16335
Phone: (814) 724-1800
Fax: (814) 333-6580
E-mail: sales@heatrex.com
www.heatrex.com Privacy  |  Sitemap
All Categories > Unit and Comfort Heaters > Forced-Air Heaters > 931 Series Commercial Ceiling Heater > Item # HX-931U03000T  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # HX-931U03000T, 931 Series Commercial Ceiling Heater



The 931 Series ceiling heater is designed for commercial use in areas where no wall space is available. It provides supplemental heat to prevent cold drafts or wide temperature swings.
  • Extended Capacity : 931 Series heaters are available as single or double modules with ratings up to 8000 W and 320 CFM in 480 volt single-phase.
  • Control Options : Heaters can be controlled by a building management system with the addition of a low voltage relay.
  • Flexible Mounting : Units can be surface mounted, recessed or installed in T-Bar ceiling systems.
    All models listed are single-phase. 





Specifications  · Standard Construction Features  · Applications

Specifications

Power

3000 W

Voltage Rating

480 V

Total Amps1

6.6 A

Airflow

160 CFM

Approx. Air Temperature Rise

60 ºF
33
ºC

Weight

26 lb
12
kg

Finish Options

A - Almond
W - White

Factory Built-in Options

D1 - Disconnect Switch, 600 V, Three-pole, 32 Amp
D2 - Disconnect Switch, 600V, Three-pole, 64 Amp

D3 - Disconnect Switch, 277 V, Double-pole, 16 Amp

R1 - 24 V Control Relay

R2 - 24 V Control Relay with Transformer

T1 - Built-in Tamperproof Thermostat

T2 - Adjustable Thermostat

Field-Installed Options

931-124506 - Surface Mounting Box (1500-4800 W)
931-124507 - Built-in Thermostat Kit both knob & tamperproof plug provided

931-124508 - 24 V Relay Kit

931-124512 - T-Bar Adapter 23-3/4" x 23-3/4" (1500-4800W)

931-158213 - T-Bar Adapter 23-3/4" x 47-11/16" (6000-8000W)

931-218272 - Extruded Aluminum Front Grille (1500-4800W)

931-218274 - Surface Mounting Box for Aluminum Front Grille (1500-4800W)

931-218275 - Surface Mounting Box for Aluminum Front Grille (6000-8000W)
1 Total Amps includes motor amps.


Standard Construction Features
  • Heating Elements - Steel finned tubular elements.
  • Outlet Grille - The louvered front grille is made of 18-gauge steel with rounded corners. The grille is finished with an epoxy-polyester powder paint in white or almond.
  • Built-in Controls - Automatic reset thermal cutout, fan override with contactor when required.
  • Fan Motor - Permanently lubricated, open and ventilated fan.
  • Installation Requirements - For best performance, do not install ceiling heaters above recommended maximum mounting height of ten feet.




Applications
  • Entryways
  • Garages
  • Hallways
  • Restrooms
  • Stairwells
  • Vestibules




 MORE IMAGES 

·  Dimensions Drawings


 DOWNLOADS 

931 Series Commercial Ceiling Heater
(PDF, 166KB)

Unit Heaters Limited Warranty
(PDF, 90KB)

Unit Heaters Color Selection Chart
(PDF, 86KB)

Submittal
(DOC, 1013KB)

IOM
(PDF, 320KB)

IOM - Thermostat Kit
(PDF, 120KB)


Heatrex