Item # HX-930U01000V, 930 Series Register Wall Heater On Heatrex, Inc.

Products Tubular & Finned Tubular
Heating Elements Electric Immersion
Heaters Enclosure Heaters/
Switchgear Heaters Process Duct Heaters Circulation Heaters Refrigeration Defrost
Heaters Bolt Heaters/Flexible
Heaters HVAC Electric Duct
Heaters Unit and Comfort Heaters Explosion-Proof Heaters Impedance Heating
Systems Blog

Heatrex
P.O. Box 515,
Meadville, PA 16335
Phone: (814) 724-1800
Fax: (814) 333-6580
E-mail: sales@heatrex.com
www.heatrex.com Privacy | Sitemap

All Categories > Unit and Comfort Heaters > Forced-Air Heaters > 930 Series Register Wall Heater > Item # HX-930U01000V


	Item # HX-930U01000V, 930 Series Register Wall Heater

larger image

The 930 Series register wall heater is ideal for use as a primary heat source in small areas or as supplemental heat in more spacious areas. Multiple heaters can be used to effectively heat large or odd-shaped rooms.

Installation Options : Units are designed for recessed mounting into shallow 2-inch by 3-inch stud walls or surface mounting with the use of an optional box.
Safety : Finned tubular elements provide electrical isolation from accidental contact.
Temperature Control : An optional thermostat can be field installed in the heater or a remote thermostat can be used.
All models listed are single-phase.

Specifications · Standard Construction Features · Applications

Specifications

Power

750 W
1000 W

Voltage Rating

208 V
240 V

Total Amps¹

3.8 A
4.5 A

Airflow

40 CFM

Approx. Air Temperature Rise

60 ºF
80 ºF
33 ºC
44 ºC

Weight

9 lb
4 kg

Finish Options

A - Almond
W - White

Factory Built-in Options

D3 - Disconnect Switch, 277 V, Double-pole, 20 Amp
T1 - Tamperproof Thermostat Single-pole, 25 Amp
T2 - Tamperproof Thermostat, Double-pole 25 Amp with off position
T5 - Adjustable Thermostat, Single-pole 25 Amp
T6 - Adjustable Thermostat, Double-pole 25 Amp with off position

Field-Installed Options

930-166766 - Surface Mounting Box
930-166767 - Adjustable Thermostat Kit, Single-pole 25 Amp
930-166768 - Tamperproof Thermostat Kit, Single-pole 25 Amp
930-166769 - Adjustable Thermostat Kit, Double-pole 25 Amp with off position
930-166770 - Tamperproof Thermostat Kit, Double-pole 25 Amp with off position

¹ Total Amps = Heating element amps and motor amps.

Standard Construction Features

Heating Elements - Steel finned tubular elements.
Outlet Grille - The louvered front grille is made from 20-gauge steel. The grille is finished with epoxy-polyester powder paint in white or almond.
Built-in Controls - Automatic reset thermal cutout.
Fan Motor - Quiet, factory lubricated fan operates at 38 dBA at 40 CFM for models up to 1000 W and 41.3 dBA at 80 CFM for all models rated above 1000 W.
Installation Requirements - The air outlet should be installed a minimum of ten inches above vinyl floors.

Applications

Hallways
Restrooms
Stairwells

MORE IMAGES


	· Dimensional Drawing

	· Optional Surface Mounting

DOWNLOADS


		930 Series Register Wall Heater (PDF, 193KB)

		930 Series Submittal (DOC, 985KB)

		Unit Heaters Limited Warranty (PDF, 90KB)

		Unit Heaters Color Selection Chart (PDF, 86KB)

		IOM (PDF, 266KB)

Item # HX-930U01000V, 930 Series Register Wall Heater