Heatrex custom manufactures TUBULAR & FINNED TUBULAR
HEATING ELEMENTS, IMMERSION
HEATERS, DUCT HEATERS,
UNIT HEATERS & CIRCULATION
HEATERS
Products Tubular & Finned Tubular
Heating Elements Electric Immersion
Heaters Enclosure Heaters/
Switchgear Heaters Process Duct Heaters Circulation Heaters Refrigeration Defrost
Heaters Bolt Heaters/Flexible
Heaters HVAC Electric Duct
Heaters Unit and Comfort Heaters Explosion-Proof Heaters Impedance Heating
SystemsBlog
Heatrex
P.O. Box 515,
Meadville, PA 16335
Phone: (814) 724-1800
Fax: (814) 333-6580
E-mail: sales@heatrex.com
www.heatrex.com Privacy  |  Sitemap
All Categories > Explosion-Proof Heaters > 236 Series Compact Explosion-Proof Unit Heater > Item # HX-236-F01T-0121U  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # HX-236-F01T-0121U, 236 Series Compact Explosion-Proof Unit Heater


Heatrex's Compact explosion-proof unit heater is designed with both size and economy in mind. 236 Series advantages and unique features include :
  • Compact Size : This small design is only 13 inches wide, which makes it ideal for applications where limited space is available.
  • Low Cost : The Compact design offers the most economical solution for heating small Class I, Group D hazardous areas. It is a cost effective alternative to the use of explosion-proof convection heaters.
  • Redundant Over temperature Protection : Primary and secondary automatic reset thermal cutouts for additional safety.
  • Stainless Steel Construction : Provides superior corrosion resistant protection. Optional Dirty Duty construction adds epoxy coating to all aluminum parts for use in corrosive applications.
  • Optional Marine Duty Construction : The 236 Series design is ideal for shipboard use where size, weight and corrosion resistant construction are critical.




Specifications  · Standard Construction Features  · Applications  · Standards

Specifications

Shipping Weight
110 Pound
50 Kilogram

Power
12 kW

Voltage Rating
480 V

Phase
3

Heater Amps1
14.5 A

Ignition Temperature Code
T1

Ignition Temperature
842 ºF
450 ºC

Approx. Air Temperature Rise
37 ºF
21 ºC

Airflow
1050 CFM
1784 m3/h

Airflow Throw
25 ft
8 m

Outlet Velocity
1140 fpm
348 m/min

Motor/Fan Speed
1725 rpm

Motor/Fan Power
1/6 hp

Fan Blade Dia.
12 inches
31 cm

Net Weight
96 lbs
44 kg

Availability Code2
C

Custom Options

 View
C - Dirty Duty Corrosion Resistant Construction
CM - Marine Duty Construction
M - Manual Reset Cutout
1 The amps shown are for the heating elements only. The 120V/1 Ph/60 Hz motor draws 3.8 amps and requires a separate 120V power supply.
2 Availability Code : S = Stock, C = Custom.
Stock heaters ordered with custom options subject to longer delivery.


Standard Construction Features
  • Heating Elements - Industrial grade, Type 304 stainless steel finned tubular heating elements.
  • Terminal Enclosure - A NEMA 7, 9 cast aluminum enclosure with a threaded bottom cover permits easy access to the built-in controls from underneath the heater.
  • Housing - Round, 16-gauge stainless steel shroud.
  • Grilles - An adjustable stainless steel louvered outlet grille directs airflow 45° up or down and a heavy gauge zinc-plated rear grille protects against accidental contact with the fan blade.
  • Stainless Steel Swivel Mounting Bracket - Supplied as standard with all 236 Series compact explosion-proof unit heaters. This multi-purpose bracket can be used for either wall or ceiling mounting.
  • Built-In Controls - Include primary and secondary automatic reset over temperature cutouts, controlling and backup contactors (as required), and a time delay relay which keeps the fan running to cool the heating elements after they have been de-energized.
  • Fan Motor Assembly - Consists of a 120-volt/1-phase/ 60 Hertz motor fitted with an aluminum fan blade. The totally enclosed motor is UL Listed for Class I, Group D applications and includes permanently lubricated ball bearings and built-in thermal overload protection. The motor is factory wired into the enclosure to reduce field wiring, but requires a separate 120-volt power supply.


Applications
  • Chemical Storage/Handling Areas
  • Compressor Stations
  • Marine and Offshore
  • Oil Platforms and Refineries
  • Sewage/Wastewater Treatment Plants
  • Spray Booths


Standards
    Class I, Divisions 1 and 2, Group D
    Class I, Zones 1 and 2, Group IIA


 MORE IMAGES 

·  236 Series Std. Wall & Celling Installation


 DOWNLOADS 

Use of Electric Heaters in Hazardous Locations
(PDF, 114KB)

Unit Heaters Limited Warranty
(PDF, 90KB)


Heatrex